Belt Type Sludge Dewatering Machines

Belt Type Sludge Dewatering Machines Equipment Introduction

The belt type sludge dewatering machine efficiently separates solids from liquids in industrial and municipal sludge treatment. By pressing sludge between two high-strength filter belts, it reduces moisture content from over 90% to 40%-60%, producing transportable mud cakes. With a modular design, the machine occupies minimal space while processing 5-50 cubic meters of sludge per hour.

Equipped with an automatic cleaning system, the dewatering machine prevents filter belt blockages and extends operational life. Its intelligent control system adjusts pressure and speed for 24/7 continuous operation. Using variable frequency drive technology, the machine optimizes energy consumption and treatment efficiency.

The innovative “wedge-shaped + S-shaped” pressing zone design ensures thorough dehydration through gradual pressure changes, resulting in uniform mud cake thickness and stable solid content. Widely applied in mining, construction, printing, papermaking, and environmental cleanup, the dewatering machine helps enterprises achieve sludge reduction and meet environmental standards.

Dehydration Principle Of Belt type Sludge Dewatering Machines

The mud pump transports sludge into the dynamic (static) mixer, where it mixes with a 0.05-0.1% anionic (cationic) flocculant solution and undergoes full reaction. Fine solid particles in the slag (mud) slurry (or suspended matter) coagulate into bulky flocs, separating the sludge’s bound water and surface water into free water.

As the sludge spreads onto the filter belt in the extended gravity pre-dewatering zone (or belt concentrator), free water permeates through the belt’s backside. Gravity drains and separates the water, forming non-flowing sludge. Upon reaching the pressing-dewatering zone, the sludge enters the space between the upper and lower mesh belts, which clamp it under maximum pressure as the belts move. The rollers rotate slowly, guiding the sludge through the tension-adjustable filter belt. Here, the sludge experiences extrusion and shear forces from rollers and pressure rollers with gradually decreasing diameters, causing continuous pressure increase.

Sludge water progresses through the wedge zone, zona de joasa presiune, medium-pressure zone, high-pressure zone, and strong-pressure zone, undergoing continuous squeezing as pressure rises. in sfarsit, low-moisture sludge cakes discharge and scrape off via a scraper. The upper and lower filter belts separate, and high-pressure water cleans small sludge particles blocking the filter mesh, preparing the machine for the next dewatering cycle.

Comparison chart of Sludge before and after dehydration

(Belt dewatering machine is suitable for dewatering different mud, sludge and waste residue, meeting your needs)

Belt Press Filters Technical Parameter

JIUYI Brand Belt Mud & Sludge Dewatering Machine Feature

JIUYI’s sludge dewatering machine is a new generation of high-efficiency sludge dewatering equipment independently developed by us based on years of experience in sludge and slurry dewatering, combined with similar dewatering equipment technologies at home and abroad. A rezolvat cu succes problema deshidratării continue pe scară largă și profundă a diferitelor materiale.

1.It can work continuously for a long time with lo’w labor intensity and low cost.
2.Large processing capacity, high dehydration efficiency and low moisture content of filter cake.
3.Efficient pneumatic rectification to effectivety prevent the filter screen from deviating.
4.Easy to manage and maintain.
5.Consum redus de energie, long service life.
6.Using advanced frequency control to control the processing speed effectively.